英国GRIMM格林进口井用潜水泵 UK GRIMM Submersible pumps for imported wells
机 座 号：100-350mm
UK GRIMM Submersible pumps for imported wells summary:
The import of submersible electric pump is an energy-saving product design according to the international standard, widely used in agricultural irrigation, industrial and mining enterprises for drainage and plateau and mountainous areas, drinking water.
The pump is composed of submersible pump and submersible motor. It works underwater. The utility model has the advantages of simple structure, small size, light weight, convenient installation and maintenance, safe operation, reliability, high efficiency, energy saving, etc..
Well with submersible pump heat is directly connected with the well heat circle of three-phase asynchronous motor, the assembled heat submersible pump, hot water temperature can reach 100 DEG C, is an effective tool to sneak into the wells, extraction of geothermal water; geothermal energy is one of the cheapest, most clean, inexhaustible new energy, is widely used in many aspects of heating, bathing, medical, breeding, cultivation, agriculture, industrial and mining enterprises, entertainment services, health care facilities etc.. The utility model has the advantages of simple pump structure, reliable operation, no noise, good performance, high unit efficiency, convenient installation and maintenance, and heat resistance. Anti corrosion, anti-aging and many other characteristics, it is the latest product of geothermal water extraction.
UK GRIMM Submersible pumps for imported wells structure description:
1.The submersible pump for the well is centrifugal or mixed flow. The water lubricated bearing is adopted. The coupling of the motor and the motor is connected by a rigid coupling. The pump impeller is driven by the motor to rotate to generate centrifugal force, so that the liquid energy is increased, and the water pumping is carried out by the diversion action of the pump shell. A non-return valve body is arranged at the upper end of the water pump to prevent the working parts of the water pump from being damaged by the backflow of water in the water pipe when the electric pump is stopped. The valve is provided with a drain hole of the water in the pipeline can be slowly discharged, to prevent the winter frost crack pipe. (Note: the low lift submersible pump does not have a non-return valve body)
2.The motor is closed water filled wet structure. The motor stator winding adopts water (heat resistant) polyethylene insulated, nylon sheath multilayer structure (heat resistant) electromagnetic wire. Guide bearings and thrust bearings are made of water lubricated material. The motor is filled with clean water to cool the motor and lubricate the bearings. The motor is arranged at the bottom of the pressure adjusting membrane, to adjust the motor temperature rise caused by the expansion and contraction of the water pressure difference. The upper end of the motor is provided with a sand prevention mechanism to prevent mud and sand from entering the interior of the machine.
3.Pipeline part: used to connect the electric pump, lifting it in the well, and transport the water to the ground. Mainly by short water pipe, water pipe, elbow, plywood and other components. The short output pipe is a connecting transition component between the water delivery pipe and the electric pump. The pipe is installed at the wellhead to change the direction of the flow. The clamping plate is lifting and fixing the output pipeline during the installation of the electric pump.
UK GRIMM Submersible pumps for imported wells conditions of use:
(1) rated frequency is 50 Hz, the motor end rated voltage should be guaranteed to be 380 + 5% volts three-phase AC power supply (if the user voltage is 660 volts, special orders).
(2) the transformer load power should not exceed 75% of its capacity.
(3) when the transformer is far from the well, the voltage loss of the transmission line should be considered. The motor with power greater than 45KW requires that the distance from the transformer to the wellhead is not more than 20 meters. For high lift submersible pump, the transmission line is longer, must consider the pressure drop loss, transmission line cable specification requirements specifications than the two grade. The transformer output voltage is 400V-440V by using single transformer supply.
2.Water quality requirements:
(1) General non corrosive clean water.
(2) The sediment concentration in water is not more than 0.01% (mass ratio).
(3) PH value is within the range of 6.5-8.5.
(4) The content of chloride ion in water is not more than 400 mg / liter.
(5) Hydrogen sulfide content is not more than 1.5 mg / liter.
(6) The submersible pump for the well is not over 20 centigrade. Heat resistant submersible pump for water temperature is not higher than 100 degrees.
(7) Contains no oil.
Upright, smooth, must not have the bulge or the well pipe dislocation phenomenon, the well bore diameter is not less than the corresponding frame number.
UK GRIMM Submersible pumps for imported wells technical parameter:
Flow rate: 8-400m3/h
Rated current: 2.5-443.2A
Rated voltage: 380 + 5%V, 660V (special order)
Rated frequency: 50HZ
Base number: 100-350mm
Unit radial: 96-330mm
Outlet pipe diameter: 40-200mm
UK GRIMM Submersible pumps for imported wells purpose:
The import of submersible pump is widely used in agricultural irrigation, industrial and mining enterprises for drainage and plateau and mountainous areas, drinking water. Imported hot water submersible pumps are widely used in heating, medical treatment, bathing, breeding, planting, industry and agriculture, industrial and mining enterprises, entertainment services, health care facilities and many other aspects.
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Mobile Phone:13524269805 (微信同号）
Add:Lane 51, dragon road, Shanghai, Xuhui District